2280 OS/2 Device Driver Installation
NOTE: The built-in drivers should already come
installed.
Installation, where OS/2 was previously installed.
- Boot OS2.
- Edit the CONFIG.SYS file in the root directory, and make
sure the drivers are installed as follows:
- Reboot the System.
New Installation.
- Create a DTC Installation Diskette DTC D1 as follows:
- Backup original OS2 Diskette 1 to new diskette
DTC D1.
- Edit the CONFIG.SYS file on the DTC D1 diskette.
- Install OS2 according to the OS2 installation
guide. When Diskette 1 is prompted, insert the
DTC D1 diskette.